Abit BE7-G User Manual page 92

G-6
Option 5
Remove Spare Disk
To remove the spare disk:
1. Select "5. Remove Spare Disk" in the Main
Menu, and press <Enter> to confirm.
2. The item "1. Select Mirror Array: None"
appears in the menu zone of pop up sub
interface.
3. In the validated channel status zone, select
the spare disk to be removed and press
<Enter> to confirm.
Option 6
Set Disk Mode
This item allows you to select transfer mode for
hard disk(s).
To set disk mode:
1. Select "6. Set Disk Mode" in the Main
Menu, and press <Enter> to confirm.
2. In the Channel Status, select the channel
you would like to set and press <Enter>, an
asterisk mark appears in the parentheses to
indicate that the channel has been selected.
3. Choose the mode from the pop-up menu.
You can choose from PIO 0 ~ 4, MW DMA
0 ~ 2, and UDMA 0 ~ 5.
BE7 Series
Option 7
Set Boot Disk
This item allows you to select boot disk among
hard disk(s).
To set disk mode:
1. Select "7. Set Boot Disk" in the Main Menu,
and press <Enter> to confirm.
2. In the Channel Status, select the channel
you would like to set as bootable disk and
presses <Enter>, an asterisk mark appears
in the parentheses to indicate that the
channel has been selected.
Appendix G