Abit BE7-G User Manual page 89

HPT 372 Setup (For BE7-RAID)
12. Execute the [RAID Management Software]
by entering the Windows menu: [Start]
Programs] [HighPoint]
RAID Management Software].
13. The [RAID Management Software] screen
pops up.
[All
[HighPoint ATA
BIOS Setup for RAID
For further information on RAID concept, you
can find it on the "Technological Terms" from
our WEB site, or you can search the related
information on the Internet.
This motherboard supports the RAID operation
of "Striping (RAID 0)", "Mirroring (RAID
1)", or "Striping/Mirroring (RAID 0+1)". For
the striping operation, the identical drives can
read and write data in parallel to increase
system performance. The Mirroring operation
creates a complete backup of your files. Striping
with Mirroring operation offers both read/write
performance and fault tolerance.
After completed the installation of HPT37X
driver, you have to enable the RAID function in
BIOS setup menu. Enter the "Advanced BIOS
Features" in the BIOS setup menu. Change the
settings of "First Boot Device", "Second Boot
and "Third
Device"
"ATA133RAID". See the figure below:
NOTE: The option of "SCSI" cannot be worked
as a booting device if this "ATA133RAID" had
been selected as booting device, and vice versa.
G-3
to
Boot Device"
User's Manual