Install LAN Driver
For BE7-G:
Note: There is no need to set up Gigabit LAN
driver for Windows XP. The following
installation procedures and screen shots in this
section are based on Windows 2000.
After entering the installation menu, move your
curser to [Driver] tab. Click [Broadcom Gigabit
LAN Driver]. The following screen appears.
1. Click [MAKEDISK UTILITY].
2. Click [Next].
Click [Yes].
3.
Select Windows 2000. Click [Next].
4.
5. Insert a blank floppy disk to [A] drive. You
may also create a new directory in your hard
disk by clicking [Browse]. Click [Next] to start
copying files.
D-3
User's Manual