Abit BE7-G User Manual page 32

2-8 Chapter 2
(5). FPIO3: Infrared Device Header
This header connects to an optional IR device attached to chassis. This motherboard supports standard IR
transfer rates.
(6). FPIO4 Headers
This header is used for connecting switches and LED indicators on the chassis front panel.
Watch the power LED pin position and orientation. The mark "+" align to the pin in the figure below
stands for positive polarity for the LED connection. Please pay attention to connect these headers. A
wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could
cause system malfunction.
BE7 Series