Abit BE7-G User Manual page 78

D-2
Note: In order to enable the WOL (Wake-up On
LAN) function for BE7-S and BE7-B model in
Windows 2000 and Windows XP, it is
necessary to change the value of the "Wake Up
Capabilities" property into "Magic Frame".
Please refer to the following two steps:
1. After finished the driver installation, check
the [Network adapters] in the [Device Manager].
You will find the [Broadcom 440x 10/100
Integrated Controller] is successfully installed.
Select [Broadcom 440x 10/100 Integrated
Controller]. Right click your mouse to enter its
properties.
BE7 Series
2. Select [Advanced] tab. Move your cursor to
select the [Wake Up Capabilities] property
option and then set the value option to [Magic
Frame]. Click [OK] and restart your computer
to complete setup.
Appendix D