Table of Contents
Advertisement
Changing the carbon
Caution! The carbon of the filter should be
changed at least once annually.
3. Unscrew carbon filter.
4. Remove used carbon.
5. Fill with fresh carbon (Replacement carbon no.
009 424 024-29/8).
6. Screw up carbon filter.
Inserting carbon filter
7. First push carbon filter with seal on top into the stop
springs, then engage at front.
8. Insert metal filter.
Changing the lamps
Remove the power supply to the cooker
hood without fail. (Pull out plug or switch
off fuse.)
1. Lamp (3) slide switch at position 0.
2. Press front lamp cover up and remove downwards
at rear.
When replacing the lamp use the same model
(candle lamp 25 W E14).
3. Clean lamp cover if necessary in mild detergent
solution, dry well and replace: insert upwards at
front and push in at rear.
Ensure that the smooth surface of the lamp
cover points outwards.
10
5
4
Advertisement
Table of Contents
