Table of Contents
Advertisement
Your cooker hood
View of unit
1
Extension
2
Fan slide switch
3
Lamp slide switch
4
Lamp
5
Metal filter
6
Name-plate
Special accessories
7
Stop springs
8
Detent springs
9
Carbon filter
The cooker hood can be fitted for two different
modes of operation:
Exhaust version
The fumes produced over the cooker are cleaned in
the fat filter and taken outside via an exhaust pipe.
Circulating air version
If the structural conditions do not permit an exhaust
pipe to be fitted, the exhaust system can be provided
with an additional activated carbon filter, which collects
bacteria and odours. The clean air is then returned to
the cooking area.
The carbon filter (7, 8, 9) is available as a special ac-
cessory.
Before using for the first time
Initial pre−cleaning
Clean the outer parts with a cloth moistened with a mild
detergent solution to remove possible manufacturing
traces.
Warning! Do not use sharp, abrasive cleaning
agents, which could damage the surface.
6
2
1
5
5
4
6
7
3
8
9
Advertisement
Table of Contents
