Table of Contents
Advertisement
3-5-1 'Basic' Settings
You can configure basic wireless network settings from this menu.
The description of every setting item will be described below:
Item
Enable Wireless
pass through
without login.
Wireless Function
Mode
Band
Description
Tick the box to enable the function allows other users
not in the presentation to access the Projector Server
as an AP.
Select „Enable‟ from dropdown menu to enable wireless
network function; select „Disable‟ to disable wireless
network function (wireless radio off).
Select wireless mode. Only AP (Access Point) mode is
supported currently.
Select the wireless band. Available options are:
2.4GHz (B) - supports 802.11b wireless clients only.
2.4GHz (N) - supports 802.11 Draft-n wireless clients
only.
2.4GHz (B+G) - supports 802.11b and 802.11 Draft-n
Advertisement
Table of Contents
