Download And Install Client Software - Edimax WP-S1300 Manual

2-4 Download and Install Client Software

Before any computer can use the projector server, client software must be
installed first. Please follow the following instructions to download and install
projector server client software:
1. Use the web browser to connect to the IP address of projector server
(WLAN / LAN IP address). Projector server‟s IP address can be found at the
lower-left corner of projector server‟s display (refer to chapter 2-1).
Please note that the IP address of projector server will vary depends on the
setting of the DHCP server of your LAN, do not use the IP address listed in
above sample picture to connect to projector server.