Set The Ip Address Of The Computer; Windows 95/98/Me Ip Address Setup - Edimax WP-S1300 Manual

2-3 Set the IP address of the Computer

If there‟s no DHCP server available on your LAN, please follow the following
instructions to set the IP address of the computer, so the computers wish to
use the projector server can connect to project server.
If the operating system of your computer is....
Windows 95/98/Me
Windows 2000
Windows XP
Windows Vista
Windows 7

2-3-1 Windows 95/98/Me IP address setup:

1. Click „Start‟ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select „TCP/IP‟, then click „Properties‟.
- please go to section 2-3-1
- please go to section 2-3-2
- please go to section 2-3-3
- please go to section 2-3-4
- please go to section 2-3-5