Connect To Projector Server By Wireless Ethernet - Edimax WP-S1300 Manual

Wireless ieee802.11b/g/n

Hide thumbs Also See for WP-S1300:

Table of Contents

2-2 Connect to Projector Server by Wireless Ethernet

The wireless Ethernet interface of this projector server is switched on and

accepts any computer to establish connection by default. You can use your

computer‟s wireless utility to establish connection with this projector server.

The SSID (Service Set Identifier) of this projector server is „projector‟ by

default:

Please select the wireless network named „projector‟, and click „Connect‟ to

establish connection. In some cases, Windows will connect to projector server

automatically, or sometime it will connect to other wireless network. Please

make sure you‟re connecting to correct wireless network.

After you connected to projector server, please use web browser to connect to

projector server‟s wireless (WLAN) IP address. In the following example,

projector server‟s IP address is ‟192.168.100.10‟, which is default setting.

Table of Contents