Select User; User Switch' Button - Edimax WP-S1300 Manual

2-11 Select User

When there‟re more than one connected client software, project server can
select one of them to display its display content. In the example below, there
are two connected client software and none of them is in presentation mode:
You can use the „User Switch‟ button or remote Control to select the user, and
display its display content by projector server‟s display.

2-11-1 'User Switch' Button

A button named „User Switch‟ is located at the top of projector server:
If you wish to select which user should projector server display its display
content, you can press this button. The configuration menu of projector server
will be shown on projector server‟s display; if there is a progressing
presentation and you pressed „User Switch‟ button, presentation will be
aborted and the configuration menu of projector server will be shown.