Install Wireless Projector Server - Edimax WP-S1300 Manual

1-6 Install Wireless Projector Server

Please follow the following instructions to get the projector server installed:
1. Unpack the wireless projector server‟s package, and make sure no item in
the package is missing.
2. Connect antennas to both antenna connectors located at the back or
projector server - hold antenna base by your finger and turn in clockwise
direction to fasten it.
3. Connect the Ethernet cable to the LAN port (this port is labeled as „LAN‟ and
located at the back of this projector server)
4. Insert the audio cable which connects with external amplifier / speaker to
„Audio Out‟ port located at the back of this projector server.