NEC Dterm Series i User Manual page 12

6 Programmable Keys
These keys can be programmed as Flexible Line
key/Programmable Feature Key by Telephony
Server Administrator.
When Telephony Server Administrator sets "One-
Touch Speed Dial key" on the programmable keys,
users can assign any numbers (ex. Telephone
number, etc.) to the key (up to 24 digits). (Note 2)
* For the assignment of the keys, confirm to the
Telephony Server Administrator.
** When two telephone numbers are assigned on A
side and B side of "One-Touch Speed Dial key",
user can switch the side by PAGE key (Soft key).
7 Recall
Press key to finish the call and hear the dial tone.
8 Feature
Used to activate any features as terminal setup
functions, etc. and to program One-Touch Speed
Dial Keys.
9 Directory (Note 3)
Press key to activate speed calling - system fea-
ture.
* Not equipped on D
10 Message (Note 3)
Press key to access the voice mail system.
* Not equipped on D
11 Mic
Press key to respond hands free. LED on this key
lights during speakerphone operation.
term
4D IP.
term
4D IP.
12 Conf
Press key to establish a three-way conversation.
LED on key lights when key is active.
13 Redial
(Last Number Call, Speed Calling-Station/Group)
Press key to activate redial feature. Press redial
and scroll back through numbers that have been
dialed.
When the desired number is displayed,
press the or # (Note 4) key to activate dialing.
14 Microphone
Built-in microphone is used for hands free operation
with speakerphone.
15 Up/Down
( UP
DOWN
Used to adjust LCD contrast, speaker/receiver vol-
ume, and ringer volume.
• LCD Contrast:
Press ( ) or ( ) key while idle.
• Speaker/Receiver Volume:
Press ( ) or ( ) key during conversation.
• Ringer Volume:
Press ( ) or ( ) key during ringing.
16 Answer
When LED on this key is lit, press key to answer a
waiting call.
– 6 –
)