Unpacking Heater - Dyna-Glo Series User Manual

1. remove heater from carton.
2. remove all protective packing applied to heater for shipment.
3. retain cartons and packaging material until unit is operated and found in good condition.
4. Check heater for any shipping damage. if heater shows any external or internal
damage, promptly inform dealer/distributor where you purchased heater.
Assembly Components and Instructions for RMC-FA100 DGD and RMC-FA125 DGD
Tools required for assembly:
phillips head screw driver
and adjustable wrench
1. assembling the Cordwrap attachments:
parts required:
Screw ST3.5x10,
(4 pieces in the accessories bag),
and Cordwrap attachment 2pcs
place the cord wrap attachment
as shown, then use phillips
screwdriver to tighten the
screws and secure the
cord wrap attachments.
2. regulator and hose Connection:
See figure on right.
Connect the hose tightly to
the heater using a wrench.
please also refer to
page 8 in the manual.
5
PROPANE CONSTRUCTION HEATER

unPacKinG Heater

Tighten, clockwise,
use a wrench
hose assembly