Table of Contents
Advertisement
Quick Links
PROPANE CONSTRUCTION HEATER
USER'S MANUAL AND OPERATING INSTRUCTIONS
RMC-FA40DGD/DGD-01
RMC-FA60DGD/DGD-01
RMC-FA125DGD/LPFA125DGD/DGD-01 (70,000/125,000 BTU/HR, FORCED - AIR)
RMC-FA150DGD/DGD-01
RMC-FA40/DGP/DGP-01
RMC-FA60/DGP/DGP-01
RMC-FA125/DGP/DGP-01
LPFA125H/LPFA125H-01
RMC-FA150/DGP/DGP-01
C
ANS Z83.7-2017 CSA 2.14-2017
Contruction Heater
Adequate ventilation must be provided.
GHP Group, Inc.
6440 W Howard St
Niles, IL 60714-3302
GENERAL HAZARD WARNING
FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH
THIS HEATER, CAN RESULT IN DEATH, SERIOUS BODILY INJURY AND PROPERTY LOSS,
OR DAMAGE FROM THE HAZARDS OF FIRE, EXPLOSION, BURN, ASPHYXIATION, CARBON
MONOXIDE POISONING, AND/OR ELECTRICAL SHOCK.
ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD
USE OR SERVICE THIS HEATER.
IF YOU NEED ASSISTANCE OR HEATER INFORMATION SUCH AS AN INSTRUCTION
MANUAL, LABELS, ETCETERA, CONTACT THE MANUFACTURER.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 877-447-4768 8:30 a.m. – 4:30 pm CST, Monday – Friday
US
CONSUMER: Retain this manual for future reference.
or email us at customerservice@ghpgroupinc.com
www.ghpgroupinc.com
Printed in China
(40,000 BTU/HR,
(30,000/60,000 BTU/HR,
(120,000/150,000 BTU/HR, FORCED - AIR)
(40,000 BTU/HR,
(30,000/60,000 BTU/HR,
(70,000/125,000 BTU/HR, FORCED - AIR)
(120,000/150,000 BTU/HR, FORCED - AIR)
FA40 BTU Series
FA60 BTU Series
FORCED - AIR)
FORCED - AIR)
FORCED - AIR)
FORCED - AIR)
FA125 BTU Series
IMLPFDG - LCL
Advertisement
Table of Contents
Related Manuals for Dyna-Glo FA40 BTU Series
Summary of Contents for Dyna-Glo FA40 BTU Series
- Page 1 FORCED - AIR) RMC-FA125/DGP/DGP-01 (70,000/125,000 BTU/HR, FORCED - AIR) LPFA125H/LPFA125H-01 RMC-FA150/DGP/DGP-01 (120,000/150,000 BTU/HR, FORCED - AIR) FA40 BTU Series ANS Z83.7-2017 CSA 2.14-2017 Contruction Heater Adequate ventilation must be provided. GHP Group, Inc. 6440 W Howard St FA60 BTU Series...
-
Page 3: Table Of Contents
PROPANE CONSTRUCTION HEATER TABLE OF CONTENTS Introduction & Specifications ..........3 •... -
Page 4: Air Quality Hazard
PROPANE CONSTRUCTION HEATER PROPANE CONSTRUCTION HEATER DYNA-GLO PROPANE FORCED AIR CONSTRUCTION HEATERS The heater is designed and approved for use as a construction heater under ANS Z83.7 CSA 2.14. It is hard CHECK WITH YOUR LOCAL FIRE SAFETY to anticipate every use which may be made of this heater. - Page 5 PROPANE CONSTRUCTION HEATER USA 8-Hr Time weighted average Canada 8-hr time weighted average (OSHA 29 CFR 1926.55 App A) WorkSafe BC OHS Guidelines Part 5.1 and Ontario Workplaces Reg 833 50 ppm 25 ppm 5000 ppm 5000 ppm 3 ppm (Reg 833) Canada STEL (15 minutes Reg 833/1 hour USA –...
-
Page 6: General Safety Instructions
PROPANE CONSTRUCTION HEATER GENERAL SAFETY INSTRUCTION Accidents are always tragic especially because so many of them could have been prevented with little care and judgment. There are some basic good practices, we hope you will follow for safe use of your heater. IMPORTANT SAFETY INSTRUCTION •... -
Page 7: Unpacking Heater
PROPANE CONSTRUCTION HEATER UNPACKING HEATER 1. Remove heater from carton. 2. Remove all protective packing applied to heater for shipment. 3. Retain cartons and packaging material until unit is operated and found in good condition. 4. Check heater for any shipping damage. If heater shows any external or internal damage, promptly inform dealer/distributor where you purchased heater. - Page 8 PROPANE CONSTRUCTION HEATER INFORMATION ON SIZE * CAPACITY OF PROPANE GAS CYLINDERS: The chart below shows the number and size of propane tanks needed to run this heater. *Less gas is vaporized at lower temperatures. You may need two or more 100 pound (45 kg) tanks or one larger tank in colder weather. (See the parts list for your model of heater to get the specified regulator assembly.) Number of Tanks Temperature...
-
Page 9: Installation To The Propane Gas Tank
PROPANE CONSTRUCTION HEATER INSTALLATION TO THE PROPANE GAS TANK IMPORTANT: You must use a propane/LP gas supply cylinder that is compatible with the connection device provided with the hose and regulator. Regulator Propane/LP Supply Valve Propane/LP POL Fuel Gas Tank Fitting Hose to Hose to Regulator... -
Page 10: Lighting & Shutdown Instructions
PROPANE CONSTRUCTION HEATER PROPANE SAFETY Propane is safe to use when properly handled. Careless handling of the Propane gas tank could result in fire and/or an explosion. Therefore: • Always keep tank/cylinder securely fastened in an upright position. • Avoid tipping tank on its side when connected to a regulator since this may cause damage to diaphragm in regulator. -
Page 11: Test Firing Heater & Storage
PROPANE CONSTRUCTION HEATER SHUTDOWN INSTRUCTIONS WARNING : Motor and fan must be running before lighting, during operation and at shutdown, in order to prevent a flame-out condition which could result in personal injury or property damage. Turn gas valve knob clockwise to OFF position. -
Page 12: Troubleshooting
PROPANE CONSTRUCTION HEATER TROUBLESHOOTING TROUBLESHOOTING: PROBLEM POSSIBLE C AUSE CORRECTIVE A CTION 1. Control d ial i s o ff a nd u nit i s 1. This h eater u ses a c on4nuous s park 1. -
Page 13: Wiring Diagrams
PROPANE CONSTRUCTION HEATER WIRING DIAGRAMS NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! - Page 14 PROPANE CONSTRUCTION HEATER WIRING DIAGRAMS 125K & 150K Models only 125K & 150KSólo modelos 125K & 150K Les modèles Seulement NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
-
Page 15: Replacement Parts List
PROPANE CONSTRUCTION HEATER REPLACEMENT PARTS LIST MODELS: FA40 Series FA60 Series NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! - Page 16 PROPANE CONSTRUCTION HEATER REPLACEMENT PARTS LIST Article DESCRIPTION PART NUMBER PART N UMBER Article DESCRIPTION 40 SERIES 60 SERIES 40 S ERIES 50 S ERIES 60 S ERIES INNER SHELL ASSEMBLY 2304818 2304818 INNER ...
-
Page 17: Propane Construction Heater Illustrated / Parts Breakdown
PROPANE CONSTRUCTION HEATER PROPANE CONSTRUCTION HEATER ILLUSTRATED / PARTS BREAKDOWN MODELS: RMC-FA125DGD/LPFA125H RMC-FA150DGD... - Page 18 PROPANE CONSTRUCTION HEATER REPLACEMENT PARTS LIST PART NUMBER ITEM DESCRIPTION 125 SERIES 150 SERIES INNER SHELL ASSEMBLY 2304929 2304929 NOZZLE 5030077 2304944 FLAME CAP 2325122 2304931 THERMAL SWITCH BRACKET 2315515 2001355 THERMAL SWITCH 2201373 2201373 NOZZLE NUT 2304945 2304945 SPARK PLUG ASSEMBLY 2206034 2201393 THERMOCOUPLE ASSEMBLY (1130/1474- -425L)
-
Page 19: Warranty
WARRANTY LIMITED WARRANTY: This limited warranty is extended to the original retail purchaser of this Forced Air/Convection/Radiant Heater and warrants against any defect in materials and workmanship for a period of one (1) year from the date of retail sale (lifetime warranty for the brass nozzle burner only). GHP Group, Inc., at it’s option, will either provide replacement parts or replace or repair the unit, when properly returned to the retailer where purchased or one of our service centers as directed by GHP Group, Inc., within one (1) year of retail purchase. - Page 20 WARRANTY REGISTRATION IMPORTANT: We urge you to fill out your warranty registration card within fourteen (14) days of date of purchase. You can also register your warranty on the internet at www.ghpgroupinc.com. Complete the entire serial number. Retain this portion of the card for your records.