Lighted Drawer Shelf - GE Side-by-Side Built-In Refrigerators Owner's Manual

The drop-down shelf gives you the use
Drop-down
of another full-size shelf when you need extra
shelf
storage. It conveniently folds back out
of the way when not in use, giving you room
for storage of larger items.
To use drop-down shelf:
1. Pull forward and down to drop the shelf
2. Pull forward while lifting up to place the shelf
Lighted
The lighted vegetable drawer shelf provides
lighting for the lower compartments. The lights
vegetable
are recessed into the shelf to illuminate
drawer
the drawers below.
shelf
To remove shelf:
1. Remove the top drawer (see Drawer and pan
2. Push down gently on the back center of the
3. Lift the shelf and carefully pull forward
4. Unplug the shelf and carefully remove it from
To replace shelf:
1. Carefully set the shelf onto the side rails,
2. Plug the shelf into the refrigerator.
3. Carefully slide the shelf into place.
4. Insert the water tank cover top first so that it
5. Replace the drawer (see Drawer and pan
16
into place.
out of the way.
removal section).
climate control drawer top surface to release
the bottom of the water tank cover. Pull out
and down to remove the water tank cover
and expose the wire harness.
to expose the wires.
the refrigerator.
leaving the plug exposed.
goes up behind the gasket hanging down
from the vegetable drawer shelf. Gently push
the bottom of the water tank cover until the
bottom snaps into the the top of the Climate
Control Drawer cover.
removal section).
Drop-Down Shelf and Lighted Drawer Shelf
Built-In Refrigerators
Water Tank Cover
Water Tank
Cover
Climate Control
Drawer Top
Surface
Lighted
Vegetable
Drawer Shelf