Removal Of Freezer Drawer - GE 22 Owner's Manual And Installation Instructions

Removal of freezer drawer.

The freezer drawer can be removed, if needed, to fit through tight areas.
Read these instructions completely and carefully.
To Remove the Freezer Drawer
To remove the baskets:
Open the freezer drawer all the way.
Slide the top basket back into the freezer.
Remove the lower basket by lifting it up at the
back, then lifting the entire basket up and out
of the railings.
To remove the drawer front from the slides:
Remove the Phillips head screw on each side
of the railing. DO NOT remove the hex head
screws from the rail assemblies.
Lift up on the freezer drawer handle to separate
the drawer railings from the rail assemblies.
Set the drawer on a non-scratching surface.
To Remove the Stabilizing Brakes (if needed to fit through tight spaces)
Remove the base grille. Then remove both end
caps. Remove both stabilizing brakes with 3/8"
hex head driver.
16
Phillips
Screw
Base Grille
End Cap
Bracket