Temperature Controls; F/C; Door Alarm - GE Side-by-Side Built-In Refrigerators Owner's Manual

The temperature display shows the actual
Temperature
temperature of the freezer and fresh food
controls
compartments. The actual temperature will vary
from the set temperature based on factors such
as door opening, amount of food, defrost cycling
and room temperature.
NOTE: Frequent door openings or door left open
for periods of time may increase the internal
temperature of the freezer and fresh food
compartments temporarily.
To turn off the cooling system in both
the freezer and fresh food compartments, press
either
To turn the cooling system on, press either
will appear in the display.
To change the temperature display
Changing
between Fahrenheit and Celsius, press
display
Temp Display °C/°F.
temperatures
from °F to °C
To turn the Door Alarm feature on, press
Door
DOOR ALARM once. The ACTIVE light will come
alarm
on. To turn it off, press it again.
On models with a dispenser, the Door Alarm
feature is located on the dispenser panel on
the front of the freezer door.
8
Preset Settings:
Allow 24 hours to reach these preset temperatures.
pad until both displays show OFF.
pad. The preset temperatures of 0°F and 37°F

Temperature Controls

Built-In Refrigerators
To check the current temperature setting
for the fresh food or freezer compartment,
press the or pad once. After 5 seconds,
the display will return to the actual temperature.
To change the temperature settings, press
the or pads to desired temperature set
point for fresh food and freezer separately.
Allow 24 hours for the refrigerator to reach
the temperature you have set.
Temperature Ranges
Low
34°F
Fresh Food
1°C
–6°F
Freezer
–21°C
NOTE: Setting the controls to OFF stops
cooling, but does not shut off electrical power
to the refrigerator.
When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the door
open for more than 2 minutes.
High
45°F
7°C
+6°F
–14°C