Other Features; Set The Alarm Timer; Set The Sleep Timer; Play Karaoke - Philips FWM6000 User Manual

10 Other features

Set the alarm timer

This music system can be used as an alarm clock.
You can select disc, radio or USB as alarm source.
Note
•
If you have set a record timer and an alarm timer, only
the latest timer shall be activated.
1
Ensure that you have set the clock correctly.
2
Press to switch to standby mode.
3
Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
4
Press CD 1/2/3, or TUNER or USB to
select a source.
5
Press SLEEP/TIMER to confirm.
» The clock digits are displayed and
begin to blink.
6
Press ALB/PRESET+/- to set the hour.
7
Press / to set the minute.
8
Press SLEEP/TIMER to confirm.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1
In the standby mode, press SLEEP/TIMER
repeatedly.
» If the timer is activated,
» If the timer is deactivated,
disappears.
Tip
•
In MP3 link or AUX mode, the alarm timer cannot be
set.
•
If disc or USB source is selected but no audio file can
be played, radio is activated automatically.
EN
18

Set the sleep timer

This music system can switch to standby
automatically after a set period of time.
When the music system is turned on, press
SLEEP/TIMER repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated,
To deactivate sleep timer
Press SLEEP/TIMER repeatedly until [OFF] (off)
is displayed.
» When sleep timer is deactivated,

Play Karaoke

You can connect microphones and sing along
with a music source.
1
2
3
4
is displayed.
displayed.
disappears on the display.
Turn MIC VOL to the minimum level.
Connect one or two microphone to the
microphone ports on the main unit.
Press CD 1/2/3, or TUNER, or USB, or
MP3 LINK, or PC IN/DOCK select the
source, and start play.
Sing through the microphones.
• To adjust the volume of the source,
press VOL +/-.
• To adjust the volume of the
microphone, turn MIC VOL.
is