Listen To Radio; Tune To A Radio Station; Program Radio Stations Manually; Select A Preset Radio Station - Philips FWM6000 User Manual

8 Listen to radio

Tune to a radio station

1
Press TUNER repeatedly to select FM or
AM.
2
Press and hold
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you find optimal
reception.
Program radio stations
manually
You can program a maximum of 40 (FM + AM)
preset radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
» [PROG] (program) is displayed.
3
Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROG to confirm.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store another
station in its place.
EN
16
/ for more than 2
/

Select a preset radio station

In tuner mode, press ALB/PRESET+/- to select
a preset number.
Tip
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.

Change AM tuning grid

In some countries, the AM radio frequency step
between adjacent channels is 10 kHz (9 kHz in
some areas).
1
Select the tuner source.
2
Press and hold on the main unit for
more than 5 seconds.
» All preset stations are erased and need
to be re-programmed.

Display RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information.
1
Tune to an RDS radio station.
2
On the remote control, press RDS
repeatedly to scroll through available
information:
• Station name
• Program type
• Text messages
• Frequency