Usb Record; Record To Usb; Schedule Radio-To-Usb Record - Philips FWM6000 User Manual

9 USB record

Audio CD tracks, MP3 files, radio and audio
from external devices are recorded as USB files
in .mp3 format.
The first time you record to USB, a folder
called 'PHILIPS' is automatically created in the
USB device. Each time you record to USB,
the recorded files are stored in a sub-folder in
the 'PHILIPS' folder. Files and sub-folders are
named numerically in the order in which they
are created.

Record to USB

Plug the USB device into the USB PLAY/REC
socket of this unit.
1
Prepare the source to record from.
• Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• MP3 LINK/PC IN - Select the MP3 link/
PC IN source, then connect and start
to play an external device.
2
Press USB RECORD to start recording.
• For discs, press USB RECORD
repeatedly to select:
A [REC ONE] (record one): the first/
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press .
Note
•
If the USB device does not have enough memory to
store the audio files, a message about a full memory is
displayed.
Schedule radio-to-USB
record
Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.
Note
•
A recording is activated only in the standby mode.
•
The maximum length of a recording is 12 hours.
1
Ensure that you set the clock correctly.
2
Plug the USB device into the USB PLAY/
REC socket of this unit.
3
Tune to a radio station.
4
Press to switch to standby mode.
5
Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is displayed.
6
Press TUNER repeatedly to select FM or AM.
7
Press USB RECORD.
» The start timer digits are displayed and
begin to blink.
8
Press ALB/PRESET+/- to set the hour.
9
Press / to set the minute.
10
Press SLEEP/TIMER to confirm.
» The end timer digits are displayed and
begin to blink.
11
Press ALB/PRESET+/- to set the hour.
12
Press / to set the minute.
13
Press SLEEP/TIMER to confirm.
is displayed.
»
» At the scheduled times, the recording
begins and ends automatically.
» When the recording ends, the unit
switches to standby mode.
To deactivate or re-activate a record timer
In the standby mode, press SLEEP/TIMER
repeatedly.
» If the timer is activated,
» If the timer is deactivated,
is displayed.
disappears.
EN
17