Get Started; Connect Fm Antenna; Connect Speakers; Connect Power - Philips FWM6000 User Manual

3 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect FM antenna

Connect the supplied FM antenna to the FM
jack on the back of the main unit.

Connect speakers

Note
•
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
EN
10
Note
•
Make sure that the colors of the speaker wires and
terminals are matched.
Insert the wire completely.
• Insert the right speaker wires to "R", and
left speaker wires to "L".

Connect power

Caution
•
Ensure that the power supply socket used can
support at least 10A current loading.
•
Before connecting the AC power cord, ensure that you
have completed all other connections.
Connect the AC power cable to the AC IN
socket and the wall socket.