Table of Contents
Advertisement
Play from a Bluetooth device
You can listen to a Bluetooth device through
the micro system.
Note
•
Before you connect a Bluetooth device to the unit,
familiarize yourself with the Bluetooth capabilities of
the device.
•
Keep the unit away from other electronic devices that
may cause interference.
•
The effective operation range between the unit and the
paired device is approximately 10 meters (30 feet).
•
Any obstacle between the unit and the device can
reduce the operational range.
1
Press SOURCE repeatedly to select BT
source.
» The Bluetooth indicator flashes blue.
2
Activate the Bluetooth function on your
Bluetooth device (see the device user
manual).
3
Select "PHILIPS OTT2000" on your device
for pairing.
4
After successful connection, the Bluetooth
indicator turns to solid blue.
5
Start music play on your Bluetooth device.
Tip
•
If the micro system switches from a Bluetooth source
to another source, the connected Bluetooth device
disconnects automatically.
•
The system can memorize up to 4 previously
connected Bluetooth devices.
USB record
Audio CD tracks, MP3 discs,audio from vinyl
record and Bluetooth, radio, and audio from
external devices can be recorded as .mp3
format files to a USB storage device.
12
EN
The first time you record to the USB storage
device, a folder named 'PHILIPS OTT2000' is
automatically created in the USB storage device.
Each time you record, the recorded files are
stored to this folder.
Record to USB
Plug the USB storage device into the
socket of this device.
1
Prepare the source to record from.
• Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• AUX IN - Select the Phono /Aux
source, then connect and start to play
an external device.
• Phono - Select the Phono /Aux source,
then play the vinyl record.
• Bluetooth - Select the Bluetooth
source and play the tracks.
2
REC to start recording.
Press
• For CD discs, press
to select:
A [REC_ONE] (record one): the first/
current track is recorded.
B [REC_ALL] (record all): all tracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press .
Note
•
If the USB storage device does not have enough
memory to store the audio files, a message about a full
memory is displayed.
•
For CD disc, recording process is completed only when
the entire track is recorded.
•
For MP3 discs, the system copies files to the USB
REC is pressed.
storage device if
REC repeatedly
Advertisement
Table of Contents
