Usb Record; Record To Usb; Schedule Radio-To-Usb Record - Philips FWT3600X/78 User Manual

9 USB record

Audio CD tracks, MP3 files, radio and audio
from external devices are recorded in .mp3
format.
The first time you record to USB, a folder
called '_PHILIPS' is automatically created in the
USB device. Each time you record to USB, the
recorded files ares stored in a sub-folder in the
'_PHILIPS' folder. Sub-folders are named based
on the source of recording (AM, FM, MP3 LINK
etc); and files are named numerically in the
order they are created in the sub-folder.

Record to USB

1
Plug the USB device into the USB DIRECT
socket of this unit.
2
Prepare the source to record from.
• Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• AUDIO IN/PC IN - Select the MP3
LINK/PC IN source, then connect and
start to play an external device.
• Karaoke - Singing during karaoke.
3
Press USB RECORD to start recording.
• For discs, press USB RECORD
repeatedly to select:
A [REC ONE] (record one): the first/
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press .
18 EN
Note
•
If the USB device does not have enough memory to
store the audio files, a message about a full memory is
displayed.
Schedule radio-to-USB
record
Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.
Note
•
A recording is activated only in standby mode.
•
The maximum length of a recording is 12 hours.
1
Ensure that you set the clock correctly.
2
Plug the USB device into the USB DIRECT
socket of this unit.
3
Tune to a radio station.
4
Press to switch to standby mode.
5
Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
6
Press TUNER repeatedly to select FM or
AM.
7
Press USB RECORD.
» The start timer digits are displayed and
begin to blink.
8
Press ALB/PRESET+/- to set the hour.
9
Press / to set the minute.
10
Press SLEEP/TIMER to confirm.
» The end timer digits are displayed and
begin to blink.
11
Press ALB/PRESET+/- to set the hour.
12
Press / to set the minute.