Listen To Fm Radio; Tune To Fm Radio Stations; Program Fm Radio Stations Automatically; Program Fm Radio Stations Manually - Philips MCM2050 User Manual

5 Listen to FM
radio

Tune to FM radio stations

Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
Ensure that you have connected and fully extended the
supplied FM antenna.
1
Press FM to select FM tuner mode.
2
Press and hold
» [SEARCH] (search) is displayed.
» The unit tunes to an FM station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press / repeatedly until you find optimal
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold PROG for 3
seconds.
» [AUTO] (auto) is displayed.
» The unit stores all the FM radio
stations automatically and then
broadcasts the first preset radio
station.
EN
14
/ for 3 seconds.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press / repeatedly to select a channel
number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.

Select a preset radio station

In tuner mode, press
buttons to select a preset number.

Show RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon is displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
following information (if available):
» Program service
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» Radio text message
» Time
/ or the numeric