AEG COMPETENCE D8100-1 Operating Instructions Manual page 11

3) How To Set The Oven Timer Contro
The main oven only can be automatically timed.
When using the timer control for the very first time
it is advisable to let it operate while you are at
home. The displays can be checked to show that
it is operating correctly and you will feel confident
to leave a meal to cook automatically in the future.
A)To Set The Timer To Switch On And
Off Automatically
1. Ensure the electricity supply is switched ON and
the correct time of day is displayed, e.g. 10.am
as Fig 6.
2. Press button repeatedly until the Cooktime
function is selected. The neon will flash and the
control panel will display 0 00 as Fig 7.
3. Press button or
time (up to 23 hours 59 minutes). The
programmer will wait 5 seconds and then start
running. The 'Cooktime' neon will remain
constant and the display will revert to the
temperature set.
4. Press button
'Endtime' function is selected, the neon will
flash. The control panel will display the end of
cooking time (that is, the actual time plus
cooking duration). See Fig 8
5. If this is not the time you require, press button
or within 5 seconds to select the required
end of cooking time.
6. Place food in the oven, select a cooking function
and set the cooking temperature .
7. The oven will switch on and off automatically.
The end of cooking will be marked by an
acoustic alarm.
To switch off the acoustic alarm, press any button.
The control panel will display the time of day and
the endtime neon will go off, see Fig 9.
to select the required
and scroll down until the
l
Fig 6.
Fig 7.
Fig 8.
Fig 9.
11