Care And Cleaning; Cleaning Materials; Cleaning The Outside Of The Oven - AEG COMPETENCE D8100-1 Operating Instructions Manual

CARE AND CLEANING

BEFORE CLEANING
ALWAYS ALLOW THE COOLING FAN
TO COOL THE OVEN DOWN BEFORE
SWITCHING OFF THE ELECTRICITY
SUPPLY.

CLEANING MATERIALS

Before using any cleaning materials on your appliance,
check that they are suitable and that their use is
recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as
they may dull the surface finishes. Harsh abrasives and
scourers should also be avoided as damage will occur.
CLEANING THE OUTSIDE OF THE
OVEN
Regularly wipe over the control panel, oven doors and
handles using a soft cloth and hot soapy water. To
prevent streaking finish with a soft cloth.
Do not attempt to remove any of the
control knobs from the panel as this may
cause damage and is a safety hazard.
Under no circumstances should the
door assembly be detached from the
product for cleaning. Please refer to the
cleaning instructions.
Model D8100-1M only
Stainless steel cream cleaners can be abrasive and
should be avoided as damage to the surface finish can
occur. Washing up liquid and hot water or liquid
stainless steel cleaners such as Homecare Stainless
Steel Cleanser and Polish may be used to remove
fingermarks.
Cleaning the Brass Handles (where fitted)
It is strongly recommended that only hot water to which
a little washing up liquid has been added and a soft
cloth is used for cleaning the brass handles.
ANY OTHER CLEANING MATERIALS WILL DULL
THE BRASS PLATED FINISH.
THE OVEN
36