Page 2
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
Page 3
Europe – EU Declaration of Conformity Česky [Czech] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se Lietuvių Šiuo [manufacturer name] deklaruoja, kad šis [equipment type] atitinka základními požadavky a dalšími příslušnými ustanoveními směrnice [Lithuanian] esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. 1999/5/ES.
Page 4
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 5
Table of Contents Table of Contents Product Overview Easy Access Introduction Web Browsers Product Overview Basic Connection Mobile Phone Viewing Application Windows Live Messenger Hardware Live View Installation Hardware Installation Safety Instruction Live View Control Panel EZvuu Minimum System Requirement Setting Client Setting Package Contents...
Introduction The F3101/3106 is an ultra-compact H.264 Megapixel Key Features: Table of IP Camera equipped with a high sensitivity •Maximum Resolution 1280x1024 (1.3MP) Contents progressive scan CMOS sensor, achieving high image •DDNS Supported quality and superior low-light performance. F3106 •Simultaneous H.264, MPEG-4 and Motion JPEG video also supports 802.11b/g/n wireless connection with...
Basic Connection Wired Connection Wireless Connection (Only IP1050) Table of Contents 1. Connect the power adaptor to IP Camera. 1. Connect the power adaptor to IP Camera. 2. Connect IP Camera’ Ethernet port to your Hub/ 2. Connect to Wi-Fi Product Switch / Router Overview...
Page 9
Application Table of Contents Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix...
Safety Instruction Before you use this product In case of a breakdown Table of This product has been designed with safety in mind. However, In case of system breakdown, discontinue use and contact Contents the electrical products can cause fires which may lead to your authorized dealer.
Minimum System Requirement Table of Contents Item Requirements Product Core Duo 2.8GHz (or equivalent AMD) Overview Graphic Card 256 MB RAM graphic cards(or equivalent on-board graphic cards) Hardware Installation Operating System Windows2000, 2003, XP, Vista, Windows 7, Mac OS X Leopard Web Browser Internet Explore 6 or later EZvuu...
Package Contents Table of Camera – F3101/3106 Network Camera Contents Quick Installation Guide - To provide brief product information and quick installation and wireless setting. Product Software CD – Free bundled web-based 9 channels IP Overview Surveillance Software, EZvuu wizard, User Manual and Quick Installation Guide.
Physical Description Table of Front View Contents Focus Adjustment Ring - Adjust focus manually to achieve the best image quality. Product Power LED indicator - Power LED will light up after Overview the IP Camera completed the boot process. Network LED indicator - Network LED will light up Hardware after the IP Camera connected with network.
Page 15
Physical Description Table of Contents POWER LED Product Steady Red Boot up process Overview Steady Blue Boot up complete Steady Blue → Flash Purple Push WPS button and ready for connecting Hardware wireless router/AP Flash Purple → Steady Blue WPS configuration finished Installation Flash Purple →...
Physical Description Table of Bottom View Contents DC 12V - For connection of 12V DC input. Reset – When the device is empowered, press the Product Reset Button to reboot the device, or hold the Reset Overview Button for 10 seconds to set the device settings back to factory default.
Mounting and Cable Connecting Wall and Ceiling Mounting Power and Ethernet Connecting Table of Contents 1. Use the 3 supplied screws to fix the base plate to a 1. Use a standard RJ-45 network cable to connect the flat surface. IP Camera to the Network connection Product 2.
Page 18
EZvuu Table of Live View Contents Client Setting Product Camera Console Overview Remote Playback Remote Record Hardware OSD Toolbar Installation EZvuu Easy Access Live View Setting Appendix...
Live View Table of Contents Product Overview Hardware Installation EZvuu Easy Access 1. Screen Division Live View Allocate the sub-screen display by clicking on the desired layout icon. 1 channel; 4 channel; 6 channel; 9 channel 2. Logout Setting Click to logout EZvuu 3.
Page 20
Live View Table of Contents Product Overview Hardware Installation EZvuu Easy Access 4. Camera Group Live View Click to see which cameras in this group. The following is the meaning of each icon: No owner cameras group. It will flash when there’s new no owner camera. Your cameras group Friends camera group Setting...
Page 21
Live View Table of Contents Product Overview Hardware Installation EZvuu Easy Access 6. Screen Position Live View Display this camera in which sub-screen. Blue means live view, green means playback, orange means remote playback and red means record. 7. Camera Status Setting Click to display control panel.
Client Setting Table of Contents Product Overview 1. Online Users Hardware Display online users of your account. The limitation is simultaneously 5 users online. Installation 2. Account Name Display the name of your EZvuu account. 3. Account Setting EZvuu Right Click your account and it will display your account setting including: "Change Password", "E-mail Setting"...
Camera Console 1. Camera Name Table of Display nick name of this camera. You can right click Contents to change the nick name. Product 2. Camera Console Overview Click to display camera console. Click to share this camera to your friends. Hardware Click to remove this camera from your camera...
Remote Playback Table of 1. Remote Playback Contents Click to display remote playback console. 2. Time Selector Product Using the date selector, it is possible to jump Overview straight to recordings from a specific point in time. You can drag to the blue background of timeline browser to remote playback.
Remote Record 3. Record Schedule Table of Display the scheduled recording time of each day. Contents The black rectangle means what day today is of the camera. The blue timeline represents the recording time Product of today. Overview 4. Periodical Recording Status Display periodical recording status.
Page 26
OSD Toolbar Table of 2. Playback Controls Contents Right click the screen division and there are 5 video operations including: Product Stop playing this channel Start recording to your local PC. The icon will Overview display When the video is on recording. Enter the setting page of this camera Hardware 1.
Easy Access Table of Web Browsers Contents Windows Web Browsers Product Mac Safari Overview Mobile Phone Viewing Using IP Camera Via iPhone Hardware 3G Mobile Phone Streaming Installation 2.5G Mobile Phone WAP 2.5G Mobile Phone Browser EZvuu Windows Live Messenger Easy Access Live View Setting...
Web Browsers Windows Web Browsers Table of Contents 1. Start your web browser, and enter the IP address 3. The monitor image will be displayed in your Product or host name of the IP camera in the Location / browser. In the far left side of main configuration are Overview Address field of your browser.
Web Browsers Mac Safari Table of Contents 2. Use the default account “admin” and default 1. Click the Safari icon, and enter the IP address of Product password “admin”. the IP camera in the Location / Address field of Overview your browser.
Page 30
Web Browsers Table of 3. The monitor image will be displayed in your browser. In the far left side of main configuration are Contents Setting, Client Setting, and Image Setup. Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix...
Mobile Phone Viewing Using IP Camera Via iPhone Table of Contents 1. Select Safari function 3. Type name and password. Default value is admin / admin. Then click Login In Product Overview Hardware Installation EZvuu Easy Access 2. Enter IP address in your web link. 4.
Mobile Phone Viewing 3G Mobile Phone Streaming 2.5G Mobile Phone Browser Table of Contents For 3G mobile phone viewing, type For 2.5G mobile phone viewing, type “ rtsp://<IP>:<PORT>/video.3gp ” into your 3G “http://<IP>/mobile.wml ” into your 2.5G WAP Product Streaming Link. <IP> is the Public IP address of your IP Browser.
Windows Live Messenger 1. Apply for a new MSN account for your 4. You will get IP information automatically Table of Device Contents Product 2. Type login account and password Overview Hardware Installation EZvuu 5. Click to live viewing by Windows Live Messenger 3.
Page 34
Windows Live Messenger 6. Click Action button and choose Start 7. Click icons to snapshot or optimize image Table of control panel Contents Product Overview Hardware Installation EZvuu Easy Access Snapshot Image Setup Live View Brightness Contrast Setting Saturation Appendix Default Image Settings...
Live View Table of Live View Control Panel Contents Setting Product Client Setting Overview Image Setup Hardware Installation EZvuu Easy Access Live View Setting Appendix...
Live View Control Panel Full Screen Table of Contents Snapshot Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix Video Play Audio In Audio Out Zoom In/Out...
Page 37
Setting Setting HELP is an online help and support. It provide Table of solutions immediately. Contents This function is only for the Administrator. Click this button to get into the setting page. Product Overview Hardware Installation EZvuu There are four sub-folders including System, Camera, Easy Access Network, and Events and a Question mark inside.
Page 38
Client Setting Client Setting Table of Contents This function is only for the administrator and client. Mode Product Click the pull-down box to choose between H.264, Overview MPEG-4 MJPEG, and JPEG video compression mode. MJPEG streaming is unavailable if RTSP mode is “On.” Hardware Installation Video Size...
Image Setup Brightness Table of The higher value the brightness is, the brighter the Contents image is. Contrast Product The contrast is a measure of a display system, defined Overview as the ratio of white to black that the system is capable of producing.
Page 40
Setting Table of System Messenger Contents Information Product Date/Time Wireless Overview Account Events System Log FTP Client Hardware Initialize SMTP Installation Camera Network Storage General Memory Card EZvuu Profile 1 Motion Detection Profile 2 Audio Detection Advanced Schedule Easy Access Playback Help Network...
Page 41
System Information Date / Time format Table of Pull down box to select different time display formats. Contents The Information page provides the product factory Adjust information which includes Product Name, Keep current setting Product Firmware Version and Web Version. Keep the current date and time of this IP Camera.
Page 42
System Account Table of User name Contents Set a user name between 4-16 characters. The device fault account and password setting is Password “admin / admin”. That means everyone who knows IP Set a password between 4-16 characters. Product address can access the device including all Re-type Password Overview configuration.
System System Log Initialize Table of Contents The System Log function allows users to review any Reboot changes and events happened. The system starts Reboot this IP Camera and it takes two minutes to Product logging automatically after started. reboot this IP Camera. Overview Factory Default Reset this IP Camera to the factory default setting..
Page 44
Camera General Table of LED Indicator Contents Turn on/off the LED indicator. Text Overlay Product You can see some information on the display screen Overview which includes Date / Time and user-defined text. Also, you can change the background color. Privacy Mask Hardware You can cover a specific area of the video image.
Page 45
Camera Profile 1 Image Size Table of Specify the image size from 1280x1024 to 320x240 of Contents profile 1. Frame Rate Product Set the frame rate of profile 1. Overview Quality Auto Hardware The quality and bitrate will be adjusted automatically Installation according to the frame rate.
Page 46
Camera Profile 2 Image Size Table of Specify the image size from 1280x1024 to 320x240 of Contents profile 1. Frame Rate Product Set the frame rate of profile 1. Overview Quality Auto Hardware The quality and bitrate will be adjusted automatically Installation according to the frame rate.
Page 47
Camera Advanced Exposure Mode Table of Choose Auto, High Speed Mode or Manual upon the Contents capture environment. Auto Product Choose Auto and you have 2 options to adjust the Overview exposure condition. Back light compensate: Hardware Click it on and it helps avoid problems in situations Installation where the main subject ends up being too dark, such as when shooting people or other subjects in front of...
Page 48
Camera Playback Table of Snapshot Full Contents screen Mirror &flip Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix Digital zoom Volume & mute Video play control...
Page 49
Network Information Use the following IP address Table of Select this when the fixed IP address is set. Contents Display the MAC address of the device. IP address Enter the IP address of the device. Product Subnet mask Overview Enter the subnet mask. Default gateway Hardware Enter the default gateway.
Page 50
Network EZvuu Table of Contents EZvuu, also known as zero-configuration networking, enables automatic to find your devices on IP Product networks. EZvuu uses Windows Live Messenger Overview protocols to allow devices to automatically discovered without the need to enter IP addresses or configure DNS servers.
Page 51
Network PPPoE IP Address Table of The IP address obtained at the PPPoE connecting with Contents If your ISP provides Dynamic IP with authentication network. by username and password, type all PPPoE User ID Product information in this part. When you use the PPPoE Enter the user ID for authentication necessary for Overview function, you need to turn on the DDNS or IP...
Page 52
Network DDNS Server name Table of Choose the DDNS Server from the list. Contents DDNS is a system which allows the domain name data User ID held in a name server to be updated in real time. The Enter the user ID for authentication necessary for Product most common use for DDNS is allowing an internet DDNS connections.
Page 53
Network UPnP HTTP port Table of The default HTTP port is 80. Or the port number can Contents You can select UPnP function “On” or “Off”. If a be entered, ranged from 1024 to 65535. ROUTER is used to access to internet and it supports SSL port Product UPnP IGD function, please turn on the UPnP Port...
Page 54
Network IP Notification SMTP Table of Select if SMTP authentication is necessary when an e- Contents When network notify type is set to “ON”, you can mail is sent. send an e-mail notification of the completion of the POP before SMTP Product network setting.
Page 55
Network Table of Enable/disable the WPS function. Contents WPS (Wi-Fi Protected Setup ) also known as a Configure via Push button standard for easy and secure establishment of a Click “Start” Product wireless home network. Configure via Pin code Overview password for this msn account.
Page 56
Network Wireless 3. Enter password at active transmit key if Table of you need. If you don't know the setting of Contents The wireless network has to be set up by using cable the wireless AP, please ask your network network connection.
Page 57
Network Messenger Protocol Table of support MSN only. Contents If Messenger option is selected On, you can set out Login Account the setting of MSN account. Messenger function Camera will use this account to login MSN server. Product provide an easy-connect feature. User can easy to Password Overview know what camera’s private and public IP address is.
Page 58
Events FTP Client – general Table of FTP server name Contents Type the FTP server name to upload still images up to Use this menu to set up for capturing and sending 64 characters, or the IP address of the FTP server. images to an FTP server.
Page 59
Events FTP Client – alarm sending Suffix Table of Select a suffix to add to the file name. Contents Set to forward the image file to the specified FTP Date & time server linked with the alarm detection by the built-in The date &...
Page 60
Events FTP Client – periodical sending Suffix Table of Select a suffix to be added to the file name sent by Contents You can set to send an image file to FTP server SMTP. periodically by selecting On to send the image file to None Product FTP server linked with setting period.
Page 61
Events SMTP – general Table of SMTP Contents You can send a mail with attached image file which Select if SMTP authentication is necessary when an e- shot by external sensor input and motion detections mail is sent. Product or shot periodically. POP before SMTP Overview Select if POP before SMTP authentication is necessary...
Page 62
Events SMTP – alarm sending Table of Suffix Contents Set to send the mail with connection to the alarm Select a suffix to add to the file name. detection. Select On to send the image file to SMTP Date & time Product server linked with the alarm detection.
Page 63
Events SMTP – periodical sending Suffix Table of Select a suffix to be added to the file name sent by Contents You can set to send an image file by SMTP server SMTP. periodically by selecting On to send the image file by None Product SMTP server linked with setting period.
Events Network Storage – general Attached File Type Table of You can choose snapshot or video clip for alarm Contents Select On if you would like to use the network storage sending. Select “Snapshot,” one snapshot will be function. Then choose one protocol between transmitted to the specified network storage location Product Windows network (SMB/CIFS) and Unix network...
Page 65
Events Suffix Network Storage – alarm sending Table of Select a suffix to add to the file name. Contents Date & time Set to transmit the snapshot or video clip file with The date & time suffix is added to the Image file connection to the alarm detection.
Page 66
Events Network Storage – periodical sending Sequence number Table of The sequence number is added to the Image file Contents You can set to send an image file by SMTP server name. periodically by selecting On to send the image file by Sequence number clear Product SMTP server linked with setting period.
Page 67
Events Memory Card– general Card Status Notification Table of Select On to enable card status notification. Contents Memory card provides local storage function for Capacity Warning saving image files to the specified SD/SDHC card in Select capacity warning when the space free is 5%, Product your camera.
Page 68
Events Memory Card– general User name, Password Table of Type the user name and Password of the user who Contents has the mail account. This setting is necessary when the SMTP server which sends e-mails performs Product authentication. Overview Recipient e-mail address Type the recipient e-Mail address up to 64 characters.
Page 69
Events Memory Card– general Table of Contents File Manager click to manage your memory card. Product Overview Hardware Installation Refresh Click to refresh this page. Back EZvuu Click to back folder. File Name Click the following file name to forward folder. Easy Access Select All Select all to delete or save to network storage.
Page 70
Events Suffix Memory Card – alarm sending Table of Select a suffix to add to the file name. Contents Date & time Set to transmit the snapshot or video clip file with The date & time suffix is added to the Image file connection to the alarm detection.
Page 71
Events Memory Card – periodical sending Suffix Table of Select a suffix to be added to the file name sent by Contents You can set to send an image file by SMTP server SMTP. periodically by selecting On to send the image file by Date &...
Page 72
Events Memory Card – backup Table of Contents Save to Memory Card Click check box to save files to memory card when Product FTP or network storage shutdown. Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix...
Events Motion Detection Threshold Table of It means the extent which the alarm will be triggered Contents There are three Motion Detection functions as Sensitivity sensors to set for different detecting zones. Each one It means that how often the sensor will scan Product has Threshold and Sensitivity inputs which you can the image different.
Events Audio Detection Threshold Table of It means the extent which the alarm will be triggered. Contents The default value is 50 The Audio detection has Threshold and Sensitivity and the value range is 0~100. Product inputs which you can adjust sequentially. Audio Sensitivity Overview Detection function can support to FTP Client, SMTP,...
Page 75
Events Schedule Schedule Selection Table of Select the list box to specify the schedule you want to Contents This is the same menu as the setting menu which is set. displayed when you click Schedule to set Effective FTP -Alarm Product period and Schedule in FTP client setting menu and e- FTP - Periodical...
Page 76
Help Help Table of Contents HELP is an online help and support. It provide solutions immediately. Product Overview Hardware Installation EZvuu Easy Access Live View Setting Appendix...
Page 77
Appendix Table of Frame Rate and Bitrate Table Contents Mega Mode Product VGA Mode Overview Storage Requirement Table Mega Mode Hardware VGA Mode Installation EZvuu Easy Access Live View Setting Appendix...
Need help?
Do you have a question about the F3101 and is the answer not in the manual?
Questions and answers