Problem Solver - GE 36, 48 Use And Care Manual

Stainless steel professional 27", 36" & 48" outdoor cooking center
Hide thumbs Also See for 36, 48:
Table of Contents

Advertisement

Questions?
PROBLEM
Use this
GRILL WON'T LIGHT • Check to see if other burners on the unit operate.
WHEN THE ROTARY
problem
IGNITER IS TURNED
solver!
BURNER FLAME IS
YELLOW OR ORANGE • Check the air shutter for proper adjustment.
IN CONJUNCTION
WITH THE ODOR
OF GAS
LOW HEAT WITH
CONTROL KNOB IN
THE HI POSITION
ROTISSERIE BURNER • Check for a spark at the igniter.
WON'T LIGHT
(on some models)
OPTIONAL
ROTISSERIE LIGHTS
BUT WILL NOT HOLD • Hold the safety valve button in until the burner remains lit.
FLAME ONCE
BUTTON IS RELEASED
(on some models)
If you need more help...call, toll free:
GE Answer Center®
800.626.2000
consumer information service
20
The Problem Solver
POSSIBLE CAUSE
• Remove the grill rack and the stainless steel radiant tray, and watch
the igniter tip. You should see a spark jump from the tip of the igniter
when the knob is turned. If there is no spark check to ensure there is
gas supplied to the unit.
• Use a match to light the burner.
• Visually check the electrode and wire while turning the igniter.
The only place a spark should appear is at the electrode tip. If the
electrode or wire leaks voltage, remove and replace.
• Purge the gas line of any air.
• Check the orifice for blockage.
• Inspect the igniter tip to make sure it is clean and free from debris.
Clean the area. Readjust for 1/8² gap.
• Check the burner inlet for obstructions.
• Placement of the cooking center is important for proper burner
operation. Do not place the cooking center in a dusty area.
• Inspect the fuel hose to ensure it is not bent or kinked.
• Adequate gas supply may not be available. Check to make sure there
is gas in the LP tank.
• If it is only one burner that appears low, the burner or burner orifice
may need cleaning.
• The air shutter may need adjustment.
• Preheat the grill for 15 minutes with the lid closed.
• Use a match to light the burner.
• Readjust the thermocouple so that it is not bent or kinked, but
lies flat against the burner.
Stainless Steel Outdoor Cooking Center

Advertisement

Table of Contents
loading

Table of Contents