Setup Wlan (Wireless Network Only); Setup Wizard; Secureasysetup; Set To Default - Brother MFC-8870DW Network User's Manual

Control Panel Setup

Setup WLAN (Wireless network only)

Setup Wizard

The Setup Wizard guides you through the wireless network configuration. For more information, see Using
the Setup Wizard from the control panel on page 20.

SecurEasySetup

TM
The SecureEasySetup
manually. By pushing a button on the wireless router or access point, you can complete setup and secure the
wireless network. Your router or access point must also support SecureEasySetup
SecureEasySetupTM software to configure your machine for a wireless network on page 25.

Set to default

The Set to default allows you to reset each wired or wireless settings to the default. If you want to reset both
wired and wireless settings, see Restoring the network settings to factory default on page 87.
1
(For Wired) Press Menu, 6, 1, 3.
(For Wireless) Press Menu, 6, 2, 4.
2
Press ▲ or ▼ to select Reset or Exit.
3
Press OK.

WLAN Status (Wireless network only)

Status

This field displays the current wireless network status; Active (11b), Active (11g), Wired LAN
Active, WLAN OFF or Connection NG.
1
Press Menu, 6, 2, 3, 1.
2
The current wireless network status will be displayed; Active (11b), Active (11g), Wired LAN
Active, WLAN OFF or Connection NG.
3
Press Stop/Exit.
software allows you to configure the wireless network easier than configuring it
TM
. See Using the
74
6