Brother MFC-8870DW Network User's Manual page 66
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-8870DW:
- Quick setup manual (58 pages) ,
- Connection manual (5 pages) ,
- Servise manual (495 pages)
Table of Contents
Advertisement
Wireless configuration for Macintosh
5
Read the Important Notice and click Next.
6
Choose Manual and then click Next.
7
For configuration, it is recommended that you
temporarily connect your Brother wireless device
directly to a free port on your access point, hub or
router using a network cable.
If you can temporarily connect with a network cable:
Check I'm able to temporarily connect my device
to my access point with a network cable. and
then click Next. Go to step 8.
If you do not have a network cable or cannot
temporarily connect the Brother wireless device to
your access point:Choose I'm not able to connect
my device to my access point with a network cable and then click Next. Go to step 9.
®
5
52
Advertisement
Table of Contents
Troubleshooting
