Brother MFC-8870DW Network User's Manual page 74
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-8870DW:
- Quick setup manual (58 pages) ,
- Connection manual (5 pages) ,
- Servise manual (495 pages)
Table of Contents
Advertisement
Wireless configuration for Macintosh
9
Refer to the instruction manual that came with your access point to set the SecureEasySetup
of your access point.
10
Put the machine in SecureEasySetup
Note
•
It will take approximately one minute for the LAN menu on the LCD to become available after the
machine restarts or is turned on.
•
If the LCD shows Connection Error, please try again.
11
Click Finish.
12
The configuration is finished. Relocate the machine to a location that is within range of your access point.
13
You have completed the wireless setup. If you would like to continue installing drivers and software
necessary for operating your device, select Start Here OSX from CD-ROM menu.
®
TM
mode. Press 6, 2, 2, 2, for SecurEasySetup and press OK.
TM
mode
5
60
Advertisement
Table of Contents
Troubleshooting
