Abit BP6 User Manual page 8

1-4
" " " " Supports Wake Up on LAN, Keyboard or Mouse, but your ATX power supply 5V
standby (5VSB) power must be able to provide at least a 720mA current capacity.
Otherwise, the functions may not work normally.
" " " " PCI slots 4 and 5 use the same bus master control signal.
" " " " PCI slot 3 shares IRQ signals with the HPT366 IDE controller (Ultra ATA/66). The
driver for the HPT 366 IDE controller supports IRQ sharing with other PCI
devices. But if you install a PCI card that doesn't allow IRQ sharing with other
devices into PCI slot 3, you may encounter some problems. Furthermore, if your
Operating System doesn't allow peripheral devices to share IRQ signals with each
other--Windows NT for example, you can't install a PCI card into PCI slot 3.
" " " " HPT 366 IDE controller is designed to support high-speed mass storage. Thus we
don't suggest you connect non-disk devices that use ATA/ATAPI interfaces, such as
CD-ROM to HPT 366 IDE connector (IDE3&IDE4).
# Sound Blaster
™
is a registered trademark of Creative Technology Ltd. in the United
States and certain other countries. Sound Blaster-LINK
of Creative Technology Ltd.
# Specifications and information contained in this manual are subject to change without
notice.
# All brand names and trademarks are the property of their respective owners.
Based on peripheral specifications and other considerations, the BP6 SMP (Symmetric
Multiple Processor) function is designed for testing only. The BP6 motherboard can't
manage the SMP function alone. It must co-operate with the CPU and OS that support
the SMP function. Therefore, any damage caused by employing an improper or OS will
void the warranty.
BP6
Important Notice
™ ™
and SB-LINK are trademarks
Chapter1