Abit BP6 User Manual page 64

3-34
Keyboard 98:
If you are using Windows
®
Windows 98 operating system. You can enable this item, and use your keyboard wake
up key to wake up your computer.
Hot Key Power On:
There are twelve options are available, Ctrl-F1 to Ctrl-F12. You can select this item and
using the Ctrl plus the one of each function key (F1 to F12) to power on the computer.
Onboard FDD Controller:
This is to Enable or Disable the Onboard FDD Controller.
Onboard Serial Port 1:
This is used to specify the I/O address and IRQ of Serial Port 1. Ten options are available:
Disable, 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4 or 2E8h/IRQ3, 3F8h/IRQ10, 2F8h/IRQ11,
3E8h/IRQ10, 2E8h/IRQ11, and AUTO.
Onboard Serial Port 2:
This is used to specify the I/O address and IRQ of Serial Port 1. Ten options are available:
Disable, 3F8h/IRQ4, 2F8h/IRQ3, 3E8h/IRQ4 or 2E8h/IRQ3, 3F8h/IRQ10, 2F8h/IRQ11,
3E8h/IRQ10, 2E8h/IRQ11, and AUTO.
Onboard IR Function:
Three options are available:
IrDA (HPSIR) mode.
ASK IR (Amplitude Shift Keyed IR) mode.
Disabled.
RxD , TxD Active:
Set IR transmission/reception polarity as High or Low.
IR Transmission Delay:
Set IR transmission delays 4 character-time(40 bit-time) when SIR is changed from RX
mode to TX mode.
Onboard Parallel Port:
Sets the I/O address and IRQ of the onboard parallel port. Four options are available:
BP6
®
98 and you have a keyboard that is designed for the
Chapter3