Abit BP6 User Manual page 29

Installing the Motherboard
Figure 2-10. BP6 back panel connectors
KBM Lower: PS/2 Keyboard Connector
KBM Upper: PS/2 Mouse Connector
USB Port Connectors
You must make sure your operating system supports this feature and you may need to install
an additional driver for individual devices. Please refer to your device user's manual for
detailed information.
Figure 2-10 shows the BP6 back panel
connectors, these connectors are for
connection to outside devices to the
motherboard. We will describe which
devices will attach to these connectors
below.
Attach a PS/2 keyboard connector to this 6-
pin Din-connector. If you use an AT
keyboard, you can go to a computer store to
purchase an AT to ATX converter adapter,
then you can connect your AT keyboard to
this connector. We suggest you use a PS/2
keyboard for best compatibility.
Attach a PS/2 mouse to this 6-pin Din-
connector.
This motherboard provides two USB ports.
Attach the USB connector from the
individual device to these connectors. You
can attach USB devices such as a, scanner,
monitor, mouse, keyboard, hub, CD-ROM,
joystick etc. to one of each USB connector.
2-17
User's Manual