Silent Extension; No Delay - GE Allegro User Manual

Hide thumbs Also See for Allegro:
Table of Contents

Advertisement

Silent extension

Your system can be set up so that the delay time is restarted if you reopen the delay
door during your initial delay time. This is useful if, after arming the system, you walk
out the door, and then remember something you forgot. You can reenter and exit
through the delay door without disarming and rearming the system.
Note:
The exit extension works on the first reentry only.
If your system is not programmed for this feature, you must disarm the system when
you reenter the armed premises to avoid setting off an alarm. Your dealer/installer
can turn this feature on or off for you. See "System options" on page 28 to determine
if this feature is currently enabled.

No delay

You can choose to turn off the entry and exit delays, causing the delay doors to arm
immediately by pressing No Delay (4) within five seconds of arming the system.
Anyone entering or exiting the premises through the delay door when the system is
set to no delay would immediately cause an alarm.
The no delay feature is normally used in the following situations:
• When you are staying at home, after you have armed the system.
• When you are arming the premises from the outside (you must have an installer
programmed keychain touchpad with the arm feature enabled to do this).
Your dealer/installer can turn this option on or off for you. See "System options" on
page 28 to see if this feature is currently enabled.
To arm to level 2 (or 3) with no delay using the panel keypad:
1. Close all perimeter doors and windows.
2. Press Arm once (or twice).
3. Enter your access code.
The system sounds two (or three) beeps.
4. Immediately after hearing the beeps, press No Delay (4).
The panel displays the current time and Arm Doors and Windows – No
Delay (or Motion Sensors, Doors and Windows – No delay).
Note:
If the quick arm feature is enabled, an access code is not required.
To arm to level 2 (or 3) with no delay using the wireless touchpad:
1. Press the desired arm button.
2. Enter your access code.
14
Allegro Control Panel User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents