Yamaha DVX-700 Owner's Manual page 28

GETTING STARTED
4 Press
/ on the remote control to highlight
[TV Screen], and then press ENTER.
Initial Setting
Video Output TV Screen
Language Component Out
Display HDMI Resolution
Options HDMI Color
5 Press
/ on the remote control to highlight one
of the options below, and then press ENTER.
4:3 (Letter Box)
Select this if you have a conventional TV. In this case, a
wide picture with black bar on the upper and lower
portions of the TV screen will be displayed.
4:3 (Pan&Scan)
Select this if you have a conventional TV and want both
sides of the picture to be trimmed or formatted to fit your
TV screen.
Note
If the disc does not support an aspect ratio of 4:3
(Pan&Scan), the content is displayed in 4:3 (Letter
Box).
16:9 (Wide)
Select this if you have a wide-screen TV.
16:9 (Compressed)
Select this if a wide-screen TV is connected to the DVD
controller with an HDMI cable, and set HDMI Resolution
to either [1920 x 1080p], [1920 x 1080i], or [1280 x
720p]. When playing back a content whose aspect ratio is
4:3, black bars cover the sides of the screen.
24
En
Selecting the output type for
COMPONENT VIDEO OUTPUT jacks
To use progressive display function, connect to a TV,
which has that function, via COMPONENT VIDEO
OUTPUT jacks.
4:3 (Letter Box)
1 Press SETUP on the remote control.
Interlace
720x480p
2 Press
Component
3 Press
4 Press
5 Press
6 When the confirmation screen appears, press ENTER
/ / /
highlight [Initial Settings], and then press ENTER.
/ on the remote control to highlight
[Video Output], and then press ENTER.
/ on the remote control to highlight
[Component Out], and then press ENTER.
Initial Setting
Video Output TV Screen
Language Component Out
Display HDMI Resolution
Options HDMI Color
/ on the remote control to highlight
[Progressive] / [Interlace], and then press ENTER.
again.
To cancel the setting, press RETURN.
Note
Do not select [Progressive] if your TV does not have a
progressive display function.
If your TV is also connected via HDMI OUTPUT
terminal, the system may ignore this setting and
output the progressive signal from COMPONENT
VIDEO OUTPUT jacks.
on the remote control to
4:3 (Letter Box)
Interlace
720x480p
Component