Yamaha DVR-S200 Owner's Manual page 60

Creating the Best Listening Space
Changing the speaker cables
Push up the release button and pull out the
supplied speaker cable from the connector.
Release button
Peel away about 10 mm of covering from the tip
of the commercially available cable and firmly
twist the cable cores.
Not twisting firmly can cause a short.
10 mm
Keep pushing up the release button and insert
the cable cores of the commercially available
cable.
Match the speaker cable polarity (+/-) with the polarity
indicator (+/-) of the connector.
Release button
Polarity indicator
Polarity indicator
Release your finger from the release button to
fasten the cable.
58