Disc Playback - Yamaha DVR-S200 Owner's Manual

Appendix

Disc Playback

One of the buttons doesn't work.
Some discs do not allow certain operations.
Cause
Playback does not start when pressing w,
or it immediately stops.
1 When moved from a very cold place to a
Cause
warm one, condensation forms on the lens.
Solution
Do not use for 1 to 2 hours.
2 You inserted a disc that CinemaStation
Cause
cannot play.
3 The disc is dirty.
Cause
Solution
Wipe the disc clean.
4 The disc is not set in the tray correctly.
Cause
Solution Set the disc in the tray correctly. See page
11.
Audio or subtitle language does not switch.
1 The disc does not contain multiple audio or
Cause
subtitle languages.
2 Use the Disc Menu to change audio or
Cause
subtitle languages. See page 36.
No subtitles appear.
1 DVD does not contain subtitle data.
Cause
2 The subtitle setting is off.
Cause
Solution Turn on subtitles. See page 13.
3 When using A-B Repeat subtitles sometimes
Cause
do not appear before and after points A and
B.
100
Viewing angle does not change.
You can only use this feature if you are
Cause
playing a disc recorded with multiple
angles.
VCR recording does not work.
Almost all DVD discs are copy protected, so
Cause
you cannot copy them.
Picture looks poor while fast forwarding or
reversing.
To some degree the picture does not look
Cause
normal, but this is not a defect.
The television (monitor) has no picture. (Or
the screen size looks strange.)
1 The setting in the On Screen Menu is not
Cause
correct.
Select Setup ¡ TV in the On Screen Menu
Solution
to set the menu item correctly.
2 The television cannot handle progressive
Cause
input.
Turn off CinemaStation's progressive output
Solution
and change to interlace input on the
television. See page 80.
Part of picture appears double with
progressive output.
The disc content does not match the
Cause
progressive output due to the editing method
or other conditions.
Turn off CinemaStation's progressive output
Solution
and change to interlace input on the
television (monitor). See page 80.
The picture quality is poor.
Adjust the picture quality using "Picture" in
Solution
the On Screen Menu. See page 95.
No Status display appears.
Under "Features" in the On Screen Menu,
Solution
switch the "Status window" to "On". See
page 95.