Hart Error Messages - Emerson 475 User Manual

5-6

HART Error Messages

Hart Application Error... "registry
failure"...Reinstall System Files...See User's
Manual for details.
Voltage detected on FF connectors. Check
your connectors and press OK.
CDC Error..."failure while switching to
HART"...Reinstall System Files...See
User's Manual for details.
DD Error..."tokenizer mismatch"...DD
version <manufacturer name, device name,
dev. rev. #, and
DD rev. #>; HART application <version
x.y>; HART app version x.y...Reinstall
DD...See Programming Interface for
details.
DD Error..."linker mismatch"...DD version
x.y; HART app version x.y...Reinstall
DD...See Programming Interface for
details.
DD Error..."developed-to mismatch"...DD
version <manufacturer name, device name,
dev. rev. #, and
DD rev. #>; HART application <version x.y>
...See Programming Interface for solution.
Warning: this DD is untested with the
current Hart App ver <manufacturer name,
device name, dev. rev. #, and
DD rev. #>...you may experience
unexpected or inappropriate results...See
Programming Interface for details on DD
updates...Do you want to accept these
risks and proceed?
DD Error..."tested-to sequence
mismatch"...DD version <manufacturer
name, device name, dev. rev. #, and
DD rev. #>; HART application <version
x.y>; HART app version x.y...See
Programming Utility for solution.
DD Error..."developed-to mismatch"...DD
version <manufacturer name, device name,
dev. rev. #, and
DD rev. #>; HART application <version
x.y>; HART app version x.y...See
Programming Utility for details
Description
A registry setting in the 475 is corrupted.
From the Field Communicator Main Menu,
do the following:
1. Double tap Settings.
2. Double-tap About Field
Communicator.
3. Double-tap RE-FLASH.
4. Tap Yes to proceed.
Insert the lead set connectors into the
HART communication terminals on the top
of the 475. The access door shows which
protocols terminals are exposed.
The HART Application fails to put the CDC
in HART mode for talking to a HART
device. From the Field Communicator
Main Menu, do the following:
1. Double tap Settings.
2. Double-tap About Field
Communicator.
3. Double-tap RE-FLASH.
4. Tap Yes to proceed.
The version of the tokenizer used to
tokenize the device description is not what
the HART Application expects and the
device description is incompatible with the
installed HART Application version.
Upgrade the system software and device
descriptions in the Field Communicator
using the Field Communicator Easy
Upgrade Utility.
The version of the linker used to link the
device description is not what the HART
Application expects and the device
description is incompatible with the
installed HART Application version.
Upgrade the system software and device
descriptions using the Field
Communicator Easy Upgrade Utility.
The device description was developed
and tested for a later HART Application
revision. Upgrade the system software
and device descriptions using the Field
Communicator Easy Upgrade Utility.
The device description was not tested and
verified with the installed version of the
HART Application. Obtain a newer version
of the device description using the Field
Communicator Easy Upgrade Utility.
The DD was tested with a previous
version, but not with this version of the
HART Application. Obtain a newer version
of the device description using the Field
Communicator Easy Upgrade Utility.
The DD was developed using a later
HART Application revision. Upgrade the
system software and device descriptions
using the Field Communicator Easy
Upgrade Utility.
Troubleshooting