Emerson 475 User Manual page 77

Troubleshooting
Device Description Error...'Device
Description header file corrupted'...To
repair, reinstall the Device Descriptions for
%s %s dev rev %d DD rev %d...see
Programming Utility for details...Press
FWDCOM to attempt to load an earlier
Device Description."
Communication Error...See User's Manual
for solution.
Forward Compatibility Blocked...The
Device Description for x Device Rev x dd
Rev x cannot be used in forward
compatibility mode...x... Press OK to load
the Generic Device Description.
Device Description Not Installed...The
Device Description for device type x device
rev x is not installed on the System
Card...See Programming Interface for
details on Device Description updates...Do
you wish to proceed in forward compatibility
mode?
Do you want to ignore this message while
communicating with this device?
There is a check sum error in the device
description header file. Obtain a newer
version of the device description using the
Field Communicator Easy Upgrade Utility.
Check the wiring to the device.
The HART Application attempts to use a
device description to run in forward
compatibility mode and finds that it cannot.
A generic device description will be used.
The device description for the connected
device is not in the 475 Field
Communicator. If you have the Easy
Upgrade option, you can add device
descriptions to your 475 Field
Communicator from the Field
Communicator Easy Upgrade Utility.
The HART Application lets you ignore
some response code warning messages,
such as Update Failure, while
communicating with a device. The next
time you communicate with the device,
this message will appear.
5-7