Remote Control; Remove Battery - Soundstream VIR-7832BI Owner's Manual

Remote control

Remove battery

Note:
 The distance may vary according to the
brightness of ambient light.
 If the remote is not used for an extended period of
time, remove the battery to prevent possible
damage from battery leakage and corrosion.
 Do not place any objects between the remote control unit and the sensor on the unit.
 Do not drop the remote control onto the floor; it will damage it beyond repair.
 Do not use the remote control unit, while simultaneously operating the remote control unit
of any other equipment; they may interfere resulting in improper operation.
 The battery normally last for about one year although depending how often the remote
control is used. If the remote control unit isn't working even when it is operated near the
unit, replace the battery with a new battery of the same make and use only a lithium cell
battery type: CR2025 (3V).
 Dispose empty batteries in accordance with your local governmental regulations.
 Do not short-circuit, disassemble, heat or dispose of fire or flames the battery.
 Keep the battery out of reach of children, should the battery be swallowed, immediately
consult a doctor.
1: MODE
2: POWER
3: BAND/RANDOM/Clear
4: ENTER
5: UP/DOWN/LEFT/RIGHT
6: EJECT
7: STEREO/MONO/*
8: P.SCN/RPT/#
9: BACKWARD/SEEK-
FAST BACKWARD
10:LOUD
11: OSD
12: PBC/STOP
13: Digit numbers
14: Play/Pause
15: Mute/Bluetooth
16: MENU
17: SUBTITLE
18: SETUP
19: ANGLE/Accept
20: INT/Eject
21: VOLUME PLUS
22: A-B/ZOOM
23: SEL
24: FORWARD/SEEK+
FAST FORWARD
25: VOLUME MINUS
26: AUDIO/GOTO
27: DUAL
28:OPEN/TILT
9