System Information; Calibration; Other Functions - Soundstream VIR-7832BI Owner's Manual

[6] TV SHAPE:
Set TFT screen mode to the correct ratio:
Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letterbox)
and Wide (16:9). Different disc formats will display different images depending this setting and
the screen size used.
[7] NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in
Europe, NTSC is commonly used in the USA and Japan. Auto is commonly used.
[8] DEFAULT:
Factory reset. Set all values to Factory default values including memory and preset stations.

SYSTEM INFORMATION

Press SYSTEM button to show the information of the
system. You can view detail system information including
serial number of the software.

CALIBRATION

The calibration of the screen is useful when some
malfunction occur with the touch screen and it needs
adjustment.
CALIBRATION procedure of the touch screen is
described as below: When the target moves to another
position, tap and hold at the center of the new target.
Repeat each time to complete the calibration process.
When the calibration has been completed, the device
switches back to the previous operating mode and retain
the previous setting. If you press Reset button, the
setting will return to factory setting.

Other functions

Subwoofer
Connect the subwoofer to the unit using sub output (see electrical diagram). Tap MENU on
screen enter into main menu setting choose setting menu. choose SOUND and set subwoofer
ON to enable subwoofer.
Parking
When the car is stopped and the parking brake is working, the screen can display the video
image, otherwise the screen can't display the video image.
Back View Camera
This unit is equipped with back view camera output. The camera is used to observe the
situation behind the vehicle when you are backing the car.
Please connect your back view camera with the back car video input. And connect the reverse
wire for back a car with the rear gear light. Rear view camera picture will be enabled when you
are backing the car.
21