Lash Adjusters; Camshaft; Rocker Arm - Mitsubishi 4G6 series Workshop Manual

4G6 ENGINE (E - W) -
Roller tip
Outside
Inside
cleaning
cleaning
A
B
E
Mitsubishi Motors Corporation
INSPECTION

CAMSHAFT

(1) Measure the cam height.

ROCKER ARM

(1) Check the roller surface. If any dents, damage or seizure
(2) Check rotation of the roller. If it does not rotate smoothly
(3) Check the inside diameter. If damage or seizure is evident,

LASH ADJUSTERS

(1) Prepare three containers and approximately five liters
Filling with
diesel fuel
C
(2) Place the lash adjuster in container A and clean its outside
Aug. 1998
Rocker Arms and Camshaft
Item
GALANT Intake
Exhaust
SPACE Intake
WAGON
Exhaust
is evident, replace the rocker arm.
or if looseness is evident, replace the rocker arm.
replace the rocker arm.
Caution
D
The lash adjusters are precision-engineered
mechanisms. Do not allow them to become
contaminated by dirt or other foreign substances.
D
Do not attempt to disassemble the lash adjusters.
D
Use only fresh diesel fuel to clean the lash
adjusters.
of diesel fuel. Into each container, pour enough diesel
fuel to completely cover a lash adjuster when it is standing
upright. Then, perform the following steps with each lash
adjuster.
surface.
NOTE
Use a nylon brush if deposits are hard to remove.
PWEE9616-A
11A-8-3
Standard value mm Limit mm
37.39 36.89
37.14 36.64
37.39 36.89
36.83 36.33
Revised