Mitsubishi 4G6 series Workshop Manual page 70

4G6 ENGINE (E - W) -
MD998442
Diesel fuel
MD998442
MD998442
Diesel fuel
MD998442
Diesel fuel
MD998442
E
Mitsubishi Motors Corporation
Diesel fuel
Diesel fuel
Aug. 1998
Rocker Arms and Camshafts (GDI)
(4) Removal the lash adjuster from the container. Then, push
down the steel ball gently and push the plunger to eliminate
diesel fuel from the pressure chamber.
Caution
D
Make sure the oil hole in the side of the body
is pointing toward container A. Do not point the
oil hole at yourself or other people.
(5) Place the lash adjuster in container B. Then, gently push
down the internal steel ball using special tool MD998442
and move the plunger through 5 to 10 strokes until it
slides smoothly. This operation will clean the lash
adjuster's pressure chamber.
Caution
D
The steel ball spring is extremely weak, so the
lash adjuster's functionality may be lost if the
air bleed wire is pushed in hard.
(6) Remove the lash adjuster from the container. Then, push
down the steel ball gently and push the plunger to eliminate
diesel fuel from the pressure chamber.
Caution
D
Make sure the oil hole in the side of the body
is pointing toward container A. Do not point the
oil hole at yourself or other people.
(7) Place the lash adjuster in container C. Then, gently push
down the internal steel ball using special tool MD998442.
Caution
D
Do not use container C for cleaning. If cleaning
is performed in container C, foreign matter could
enter the pressure chamber when chamber is filled
with diesel fuel.
(8) Stand the lash adjuster with its plunger at the top, then
push the plunger downward firmly until it moves through
its greatest possible stroke. Return the plunger slowly,
then release the steel ball and allow the pressure chamber
to fill with diesel fuel.
PWEE9616-A
11A-8a-5
Added