Table of Contents
Advertisement
Temperature
control
Interior light
and switch
Removing
full extension
drawers
6
Do not install the wine chiller where
the ambient temperature will go below
55°F (13°C) or above 90°F (32°C).
The RED WINE setting will provide a
storage temperature of approximately
55ºF (13ºC), which is optimum for the
storage for red wine.
The WHITE WINE setting will provide
a storage temperature of approximately
7ºC, which is optimum for white wine.
As with any refrigeration product, there is
a slight temperature variance at different
locations within the cabinet.
The interior light makes it easy to view
your wine labels and enhances the display
of your collection.
When the switch is in the OFF position,
the light comes on only when the door is
opened. When the switch is in the ON
All of the full extension drawers pull out
so bottles can be conveniently added or
removed.
Any of the full extension drawers can be
removed to store larger bottles.
To remove:
1. Pull the full extension drawer out to the
STOP position.
2. Push the tab on right drawer guide
down while pulling the tab on left guide
up, and pull the drawer out.
To replace:
1. Push the drawer slide arm back into
the unit.
2. Pull the small slide sub assembly
completely forward.
3. Insert the sides of the drawer back into
the guides.
4. Push until the tabs lock into place.
Controls and Features
Wine Chiller
Temperatures at the bottom of the cabinet
will be cooler than temperatures at the top
of the cabinet.
Position your wine inventory accordingly
(i.e. white wines in the cooler zones and
red in the warmer zones).
To set the control, turn it to the RED
WINE setting. Once the bottles are loaded,
allow at least 24 hours before making any
adjustments to the initial setting.
position, the light remains on continuously
for your maximum viewing pleasure.
For best viewing do not store a bottle on
the top shelf directly under the light.
Remember to turn off the light when it
is no longer needed.
To replace, push drawer slide
arm back into unit
NOTE: Make sure the tabs on the full
extension drawer guides are fully engaged
before loading any bottles. Pull the drawers
out all the way to the STOP position and
push back in several times to make sure
locking tabs are properly engaged.
Tab (push tab down on
right drawer guide, pull
tab up on left drawer
guide)
Pull small slide sub assembly
completely forward
Advertisement
Table of Contents
