HP EliteBook User Manual page 127

12. Insert a memory module:
a. Align the notched edge (1) of the memory module with the tab in the memory module slot.
CAUTION:
edges only. Do not touch the components on the memory module and do not bend the memory
module.
b. With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
c. Gently press the memory module (3) down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
NOTE: Depending on the memory configuration of your computer, the bottom DIMM
connector may not be populated.
13. Replace the keyboard (1).
14. Slide the 4 keyboard release latches (2) to lock the keyboard.
15. Close the cover.
16. Turn the computer upside down on a flat surface.
To prevent damage to the memory module, hold the memory module by the
Upgrading a memory module in the primary memory module slot 115