Honda GOLDWING GL1500 Owner's Manual page 97

Specified torque:
Axle bolt: 90 Nom (9.0 kg-m, 65 ft-Ib)
Caliper mounting bolt, upper: 23 Nom (2.3 kg-m, 16 ft-Ib)
Caliper mounting bolt, lower: 12 Nom (1.2 kg-m, 9 ft-Ib)
Axle pinch bolt: 22 Nom (2.2 kg-m, 16 ft-Ib)
!BIll
• If
a torque wrench was not used for installation, see your
authorized Honda dealer as soon as possible to verify pro-
per assembly. Improper assembly may lead to loss of brak-
ing capability.
3. If the feeler gauge cannot be inserted easily, pull the left
fork outward or push inward until the gauge can be in-
serted and tighten the axle pinch bolts with the gauge
inserted.
4. After tightening, remove the gauge. After installing the
wheel, apply the brakes several times, then recheck both
discs for caliper holder to disc clearance. Do not operate
the motorcycle without adequate clearance.
!BIll
• Failure to provide adequate disc to caliper holder clearance
may damage the brake discs and impair braking efficiency.
91