Cleaning - Honda GOLDWING GL1500 Owner's Manual

CLEANING
Clean your motorcycle regularly to protect the surface finishes
and inspect for damage, wear, and oil, coolant, or hydraulic
fluid seepage.
1. Clean the windshield with a soft cloth or sponge and plenty
of water. Dry with a soft clean cloth. Remove minor scrat-
ches with commercially available plastic polishing com-
pound. Replace the windshield if scratches cannot be
removed and they obstruct clear vision.
CAUTION:
• Do not let battery electrolyte, brake fluid or other acid
chemicals get on the windshield. They will damage the
plastic.
• A void spraying high pressure water (typical in coin-
operated car washes) at the following areas:
Brake Master Cylinders Fairing Pockets or Accessories
Clutch Master Cylinder Ignition Switch
Radiator Fins Steering Lock
Wheel Hubs Handlebar Switches
Muffler Outlets Instrument panel
Under Seat Radio Unit
2. After cleaning, rinse the motorcycle thoroughly with plenty
of clean water. Strong detergent residue can corrode alloy
parts.
3. Dry the motorcycle, start the engine, and let it run for
several minutes.
4. Test the brakes before riding the motorcycle. Several ap-
plications may be necessary to restore normal braking
performance.
1mB
• Braking efficiency may be temporarily impaired immediately
after washing the motorcycle. Anticipate longer stopping
distance to avoid a possible accident.
101